All Fahrenheit radiant panels are guaranteed for 2 years, with the possibility of extension up to 12 years.
Fahrenheit EP1/LO is a radiant wall panel that heats rooms and objects uniformly and homogeneously.
Fahrenheit controls the temperature and maintains a constant relative humidity, does not burn oxygen, is low in energy consumption, is ecological and complies with all European regulations. Ideal for civil and industrial radiant panel heating systems.
All Celsius and Fahrenheit panels are equipped with a patented ultra-performance technology. The panel is composed of two tempered crystals joined together with a vacuum, inside there is the technological system of production and control of infrared rays. The system inserted in the Celsius and Fahrenheit radiant panels is able to release, in extreme safety, infrared waves between 8.5 and 11 μm (long waves).
The ultra-performance technology of the Fahrenheit EP1/LO panel allows with 550 Wh to reach a performance of 2530 Kcal.
The low temperature infrared diffuses uniformly throughout the environment, its radiation allows to reach and heat surfaces up to 6 meters from the source.
Each electric radiant panel is equipped with an electronic control unit that allows easy and effective programming of use.
The infrared radiant panel is equipped with a patented ultra-performance technology and consumes 550 Wh . The maximum power is 4.5 Ah , limited by the processor installed to ensure a longer life of the device. Its maintenance consumption, to have a temperature of 20-21 ° C, will be around 250-400 Wh , thanks to the control unit with proportional absorption.
It is suitable for heating a volume as per the table.
IP68 Panel, on request IP69K
IP6X Control unit
|EP1/LO||550 Wh||360 mm||1150 mm||40 mm||10 kg|
|Max. Cons.||550 Wh|
|SKU||Class A||Class B||Class C||Class D|
What should be considered when choosing Celsius and Fahrenheit heating panels?
To make the choice of the most suitable panel it is necessary to take into account:
of the surface to be heated
of the dispersing surfaces (windows, doors, etc.)
the degree of thermal insulation of the building
the intended use of the property
the winter outdoor temperature (map of climatic zones and scroll through the complete list of municipalities)
any subjective needs that require higher temperatures than those established by law
To receive a free consultation send us:
- the quoted map (no sq m): dimensions of windows, external doors and heights;
- the energy class or description of the property;
- the city where the property is located.
You can send everything to us using the form on the contact page.
Ideal location for installation
The optimal position to install the Celsius and Fahrenheit panels, in order to obtain a uniformity of heat and the lowest energy consumption, is in the central part of the coldest wall 10-15 cm from the floor, thus avoiding radiation to the ceiling.
Celsius and Fahrenheit technology differs from other systems in that the heating takes place not only through the radiant panel, but above all from the walls and floor, which when heated, in turn emit infrared rays and therefore heat.
The Celsius and Fahrenheit technology guarantees excellent performance even in the coldest climatic zones or in environments that are not perfectly insulated.
To receive free personalized advice on the installation of the panels contact us.
Fahrenheit control unit
Fahrenheit panels are managed by a computerized control unit that regulates the temperature and absorption according to the actual energy requirement.
The simple temperature calibration system allows you to exploit all its potential. In the control unit there is a knob (to set the desired temperature) and an indicator, which will inform you about the status of the panel according to the setting you have set. The management of proportional absorption is designed to optimize consumption by reducing it to a minimum.
Celsius control unit
The Celsius control unit can also be installed on the Fahrenheit panel. The latter is a computerized chronothermostat.
The control unit allows programming of 6 ignitions, 6 shutdowns with 6 different temperatures in 24 hours. The control unit also allows adjustable switching on and off for each day of the week, with adjustment of the maximum absorbed power.
Inside you will also find a contact for use in home automation.
The management of proportional absorption is designed to optimize consumption by reducing it to a minimum without waste and absorption peaks.
Personalize your Fahrenheit
The crystal of the Fahrenheit radiant panel can be customized with the photo, color or graphic of your choice. Thanks to its minimal design, it will become the most suitable heating for your decor.
If you want to customize your panel contact us.
4 standard colors
Customization with images or Ral colors with additional costs on request
Warranty and Control Unit
Warranty included in the price: 2 years
Possibility of increasing the guarantee to a total of 12 years
Possibility of Celsius control unit to replace Fahrenheit
with Fahrenheit control unit is 40mm
with Celsius control unit is 50mm